Partly Cloudy
60°FPartly CloudyFull Forecast

MCDOT: McHenry County proactive in preserving our pavement

Published: Wednesday, May 1, 2013 5:30 a.m. CDT

When the need to pave roads began over 100 years ago in Illinois, little thought was given to how they would be maintained after we got “out of the mud.”

We’ll take a look at how we maintain our roads today, making them last as long as possible.

Around 1900, oil lamps still were being used as electricity had yet to go mainstream. When the lamp oil was refined making kerosene, a byproduct was created. This byproduct, gasoline, was thought to be useless since it was too explosive and was disposed of until the internal combustion engine opened new doors.

Now with the oil being refined further to get more gasoline, a new byproduct was created. This black stuff, asphalt, again wasn’t thought to have much use. Being relatively sticky and gooey, it started being applied to dirt and gravel roads to keep the dust down. However, that method had little to do with adding strength to the road.

With the car becoming used more, the call from the masses was to “get out of the mud” and make the roads stronger. To build an asphalt road, you need the right mix of asphalt with rocks. Not just any rocks. The makeup of the rocks (aggregate) has to be precise for it all to work. Different amounts of sand, gravel and stone are needed to make asphalt the effective “glue” making it all stick together, creating strength. Concrete is used in the same manner, with the “glue” part being cement, but is generally more expensive. In the U.S. today, over 95 percent of the roads are paved with asphalt.

In spite of asphalt’s usefulness, it still is susceptible to environmental conditions, such as aging, freeze-thaw cycles, and structural damage resulting from heavy traffic.

Fast-forward to more recent history.

Through the 1990s, the McHenry County Division of Transportation was able to resurface each county highway once every 10 years. Unfortunately, with more than 225 centerline miles of county-maintained highways, economic conditions within the transportation industry prevented this from continuing as construction costs (specifically, the cost of asphalt) rose dramatically in the early 2000s.

In response, MCDOT devised a plan and initiated its first pavement preservation program in 2006. Pavement preservation applies specific treatments to extend the life of pavements at the right time. The premise is to maintain good pavements in good condition for longer periods of time while poorer pavements may be deferred to eventual reconstruction. At the basic level, pavement preservation applies the right treatment, to the right road, at the right time.

The first treatment to a new road is typically crack sealing. This relatively inexpensive treatment is applied early and possibly multiple times throughout a pavement’s lifespan to reduce water infiltration below the surface. Crack-sealed roads throughout the county can easily be recognized by the tell-tale black lines running along and across the road surface.

As a pavement ages with at least one round of crack sealing, a more complex treatment is used.

MCDOT will look to apply an intermediate treatment, such as a thin lift overlay or micro-surfacing to protect and extend the life of the surface.

In spite of MCDOT’s best efforts to preserve and prolong the road, it inevitably deteriorates to a point where more extensive treatments are required to restore the pavement. In such cases, the county employs its tried-and-true process of milling and resurfacing. Here, roughly 4 inches of asphalt are milled away and replaced with new asphalt surface. The goal with this treatment is to provide a 20-year pavement-surface life before major reconstruction is necessary.

Ultimately, the pavement deteriorates to a point where the above methods are of little use. Why does this happen? Over the years, water infiltrating the pavement does damage below the surface that we can’t see. Those roads with countless potholes or those that make you feel like you’re driving on endless rumble strips are usually those due for an overhaul, top to bottom.

Part of MCDOT’s pavement preservation program is the use of a computerized pavement management system. This innovative system allows MCDOT to make well-informed decisions about its roads. In fact, McHenry County is among only a handful of local transportation agencies in Illinois committed to such a proactive solution to pavement management and preservation.

MCDOT contracts out special vehicles with onboard computers, sensors and cameras looking at the distresses in the pavement. Pavement cores are also collected showing us the makeup of the pavement top to bottom. This data is then analyzed, and a historical record of what past treatment has been done on the roads allows engineers to better predict how long the roads will last.

All this is done to make sure county highways last as long as possible, getting people and goods safely and efficiently around McHenry County at the lowest taxpayer cost as possible.

To find out where MCDOT is preserving pavement this summer, visit MCDOT’s website for an interactive map. You also can follow our progress on our construction projects through Facebook. Visit www.McHenryCountyDOT.org to learn more.

Happy and safe travels.

• Ken Baker and Pablo Faillaci are construction engineers with MCDOT and lead is pavement-preservation efforts.

Previous Page|1|2|3|Next Page

Get breaking and town-specific news sent to your phone. Sign up for text alerts from the Northwest Herald.

More News

Reader Poll

How many days will you attend the McHenry County Fair?
Five
Four
Three
One or two
None